Home > PLUMBING > ROUGH PLUMBING SUPPLIES > GAS SUPPLY LINES
Choose a sub category:
FLEXIBLE STAINLESS GAS SUPPLY
Sort By:
1 2 3
B and K Industries G014YE101124RP Gas Connectors Brass Craft CSSL54-12 Gas Appliance Connectors B and K Industries G038SS101118RP Gas Connectors
B & K Gas Connector, Series: ProLine, 1/2 in Nominal Size, MIP x FIP, 24 in Length, 1/2 psi, -40 to 150 deg F, Epoxy Coated, Yellow, CSA Certified, 3/8 in OD, For Indoor/Outdoor Use BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind, The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. CSA certified up to 0.05 psig, -40 to 150 deg operating temperature.
Brass Craft CSSD54-12 Gas Appliance Connectors B and K Industries G014SS101136RP Gas Connectors B and K Industries G038YE101124RP Gas Connectors
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. CSA certified up to 0.05 psig, -40 to 150 deg operating temperature. B & K Gas Connector, Series: ProLine, 1/2 in Nominal Size, MIP x FIP, 24 in Length, 1/2 psi, -40 to 150 deg F, Epoxy Coated, Yellow, CSA Certified, 1/2 in OD, For Indoor/Outdoor Use
Brass Craft CSSD54-24 Gas Appliance Connectors Brass Craft CSSL54-18 Gas Appliance Connectors B and K Industries G014YE101136RP Gas Connectors
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind, The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. B & K Gas Connector, Series: ProLine, 1/2 in Nominal Size, MIP x FIP, 36 in Length, 1/2 psi, -40 to 150 deg F, Epoxy Coated, Yellow, CSA Certified, 3/8 in OD, For Indoor/Outdoor Use
Brass Craft CSSL54-24 Gas Appliance Connectors Brass Craft CSSC21-24 Gas Appliance Connectors Brass Craft CSSL54-36 Gas Appliance Connectors
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind, The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind, The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
B and K Industries G038SS101136RP Gas Connectors Brass Craft CSSL54-24P Procoat Gas Dryer Connectors B and K Industries G012SS151536RP Gas Connectors
CSA certified up to 0.05 psig, -40 to 150 deg operating temperature. BrassCraft Gas Connector, Series: CSSL, Procoat, Straight, 1/2 in Nominal Size, FIP x MIP, 24 in Length, 40000 BTUH Natural Gas, 64000 BTUH Propane Gas Flow, 1/2 psi, -40 to 150 deg F, Stainless Steel, CSA Certified, 3/4 in FIP Angle Ball Valve, 150 - 250 in-lb, For Indoor/Outdoor Use CSA certified up to 0.05 psig, -40 to 150 deg operating temperature.
Brass Craft CSSD54-18 Gas Appliance Connectors B and K Industries G012YE151536RP Gas Connectors Brass Craft CSSC21-18 Gas Appliance Connectors
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. B & K Gas Connector, Series: ProLine, 3/4 in Nominal Size, FIP, 36 in Length, 1/2 psi, -40 to 150 deg F, Epoxy Coated, Yellow, CSA Certified, 5/8 in OD, For Indoor/Outdoor Use BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
B and K Industries G038YE101136RP Gas Connectors B and K Industries G012YE101036RP Gas Connectors Brass Craft CSSD54-24P Procoat
B & K Gas Connector, Series: ProLine, 1/2 in Nominal Size, MIP x FIP, 36 in Length, 1/2 psi, -40 to 150 deg F, Epoxy Coated, Yellow, CSA Certified, 1/2 in OD, For Indoor/Outdoor Use B & K Gas Connector, Series: ProLine, 1/2 in Nominal Size, MIP x FIP, 36 in Length, 1/2 psi, -40 to 150 deg F, Epoxy Coated, Yellow, CSA Certified, 5/8 in OD, For Indoor/Outdoor Use BrassCraft Gas Connector, Series: CSSD, Procoat, Straight, 1/2 in Nominal Size, FIP x MIP, 24 in Length, 85000 BTUH Natural Gas, 136000 BTUH Propane Gas Flow, 1/2 psi, -40 to 150 deg F, Stainless Steel, CSA Certified, 3/4 in FIP Angle Ball Valve, 200 - 390 in-lb, For Indoor/Outdoor Use
Brass Craft CSSL54-30 Gas Appliance Connectors Brass Craft CSSC21-30 Gas Appliance Connector Brass Craft CSSL54-36P Procoat Gas Dryer Connectors
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind, The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. BrassCraft Gas Connector, Series: CSSL, Procoat, Straight, 1/2 in Nominal Size, FIP x MIP, 36 in Length, 33400 BTUH Natural Gas, 53440 BTUH Propane Gas Flow, 1/2 psi, -40 to 150 deg F, Stainless Steel, CSA Certified, 3/4 in FIP Angle Ball Valve, 150 - 250 in-lb, For Indoor/Outdoor Use
Brass Craft CSSC21-36 Gas Appliance Connectors Brass Craft CSSD54-36 Gas Appliance Connectors B and K Industries G038YE101148RP Gas Connectors
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. B & K Gas Connector, Series: ProLine, 1/2 in Nominal Size, MIP x FIP, 48 in Length, 1/2 psi, -40 to 150 deg F, Epoxy Coated, Yellow, CSA Certified, 1/2 in OD, For Indoor/Outdoor Use
B and K Industries G014YE101148RP Gas Connectors Brass Craft CSSD54-48P Procoat Brass Craft CSSL54-48 Gas Appliance Connector
B & K Gas Connector, Series: ProLine, 1/2 in Nominal Size, MIP x FIP, 48 in Length, 1/2 psi, -40 to 150 deg F, Epoxy Coated, Yellow, CSA Certified, 3/8 in OD, For Indoor/Outdoor Use BrassCraft Gas Connector, Series: CSSD, Procoat, Straight, 1/2 in Nominal Size, FIP x MIP, 48 in Length, 60500 BTUH Natural Gas, 96800 BTUH Propane Gas Flow, 1/2 psi, -40 to 150 deg F, Stainless Steel, CSA Certified, 3/4 in FIP Angle Ball Valve, 200 - 390 in-lb, For Indoor/Outdoor Use BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind, The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
   
 
1 2 3