Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > GROUNDING RODS/CLAMPS
Sort By:
1
Gardner Bender GGS-1512R Ground Screw Eritech CP58 Acorn Standard Duty Ground Clamp Gardner Bender GGP-1502 Grounding Pigtail
Green round washer head screw for switch and outlet boxes. Connects grounding wire to the grounding rod. UL and CSA listed for 1/2 in and 5/8 in ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded. GB offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw.
Eritech ZWP1J Grounding Pipe Clamp Gardner Bender 14-GRC Ground Clamp Gardner Bender GGC-1508 Ground Clip
Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod. Connects grounding wire to the grounding rod. Convenient grounding accessories include products suitable for most job requirements.
Halex 93591 Ground Clamp Halex 36010 Ground Clamp Halex 93592 Ground Clamp
Connects grounding wire to the grounding rod. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG. Connects grounding wire to the grounding rod.
Eritech CWP1J Grounding Pipe Clamp Halex 36019 Ground Clamp Eritech CWP1JU Grounding Pipe Clamp
Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
Eritech EK17 Direct Burial Perpendicular Ground Clamp Eritech EK16 Direct Burial Ground Clamp Halex 36020 Ground Clamp
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed. Wire size fits #10 to 2 AWG. Use to secure the grounding wire to a 1-1/4 to 2 in or 2-1/2 to 4 in pipe. Bronze. UL listed.
Halex 63299 Ground Screw Erico CC58 Threadless Compression Coupler Eritech CWP2J Grounding Pipe Clamp
Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color. Use when compression couplers are required around ground rod splices. Enable ground rods to be driven deep quickly and easily without the risk of rod separation. Manufactured of high-strength silicon bronze. Coupling is tapered, so when the rod is driven into the coupling the two parts compress to form a conductive connection. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
Erico 815860UPC Grounding Rods Eritech 615840UPC Grounding Rod Gardner Bender GGP-1261 Grounding Pigtail
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1. Convenient grounding accessories include products suitable for most job requirements.
Eritech 815880UPC Grounding Rod Eritech 611380UPC Grounding Rod Erico IBTB Intersystem Bonding Termination
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1. The Intersystem Bonding Termination (IBTB), part of the Vent nVent ERICO line of facility electrical protection products, is designed to meet the requirements of the 2008 NEC? Article 250.94 bonding for other systems. The IBTB is mounted adjacent to the meter base or service entrance equipment and is a convenient way to interconnect and terminate grounding conductors from telephone, CATV or radio and television antennas. The IBTB includes corrosion-resistant, stainless steel mounting hardware and is easily accessible for connection and inspection. The lay-in connection clamp (#6 to #2 AWG or 16 to 35 sq-mm) allows easy installation of the grounding electrode conductor in one continuous length, where possible. The polymeric base and housing is impact-resistant, UV-stabilized and meets UL? requirements for weatherability performance.
Eritech 615880UPC Grounding Rod Erico 615800UPC Grounding Rods Halex 16010B Ground Clamp
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1. Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
Raco 975 Ground Clip
For grounding switch and outlet boxes using non-metallic sheathed cables from #14 to 10.
   
 
1