Home > POWER TOOLS & ACC > POWER TOOLS > POWER/PRESSURE WASHERS & ACCES > PRESSURE WASHER ACCESSORIES
Sort By:
1 2 3 ... 5
CONNECTOR QCK 1/4IN FNPT PLUG TAPE PIPE THRD PTFE 1/2X260IN CONNECTOR QCK 3/8IN MNPT PLUG
Forney Plug, 1/4 in Connection, Quick Connect Plug x FNPT Connection, Steel, 5500 psi Pressure Pipe thread tape used to wrap the threaded ends of pipe to provide a leak-free connection. 3/8 in (9.52 mm), plated steel quick connect plug x 3/8 in MNPT. Used in combination with quick couplers anywhere high pressure connections are frequently assembled and disassembled. Ideal for quick exchange of spray nozzles and spray guns. These quick connect plugs connect to all of the most common pressure washer equipment in the industry, 4200 psi.
CONNECTOR QCK 3/8IN FNPT PLUG CONNECTOR QCK 1/4IN MNPT PLUG PRESS WASHER REDUCER 3/8X1/4IN
3/8 in (9.52 mm), plated steel quick connect plug x 3/8 in FNPT. Used in combination with quick couplers anywhere high pressure connections are frequently assembled and disassembled. Ideal for quick exchange of spray nozzles and spray guns. These quick connect plugs connect to all of the most common pressure washer equipment in the industry, 4200 psi. Forney Plug, 1/4 in Connection, Quick Connect Plug x MNPT Connection, Steel, 5500 psi Pressure Brass 3/8 in MNPT to 1/4 in FNPT reducer/adapter. Reduces 3/8 in MNPT connections to 1/4 in FNPT connections. Ideal for connecting dissimilar sized pressure washer equipment.
PRESS WSHR SPRAY TIP 15DEG 4MM PRESS WSHR SPRAY TIP 25DEG 3MM PRESS WSHR SPRAY TIP 15DEG 3MM
Stainless steel chiseling (yellow color-coded) pressure washer spray nozzle with 4 mm orifice and 1/4 in (6.35 mm) Quick-Connect (QC) plug. Chiseling (yellow) QC spray nozzles have a 15 deg spray pattern for intense cleaning of unpainted hard surfaces such as grills, driveways, concrete or brick walkways or unpainted brick or stucco. The spray gun should be directed at a 45 deg angle to the surface and be used like a scraper to remove paint, grease and dirt. The orifice size of the nozzle determines the operating pressure of the end user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the gallons per minute (gpm) and pressure per square inch (psi) ratings of the pressure washer being used. As a general rule, QC spray nozzles with 4 mm orifices work excellent on pressure washers-rated between 500 psi with 1.4 gpm (low end) to 8000 psi with 5.7 gpm (high-end). For pressure washers in-between the low end and high-end, the recommended orifice size is roughly proportional from low end to high-end. The spray nozzle is designed to easily connect to a 1/4 in (6.35 mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry. Ideal for quick exchange of spray nozzles and spray guns. The spray should be directed at a 45 deg angle to the surface and be used like a scraper to remove paint, grease and dirt. Connects to all of the most common pressure washer equipment in the industry. The spray should be directed at a 45 deg angle to the surface and be used like a scraper to remove paint, grease and dirt. Ideal for surface preparation, cleaning windows, gutters and downspouts or cleaning bugs from trucks.
PRESS WSHR SPRAY TIP 0DEG 3MM PRESS WSHR SPRAY TIP 0DEG 4MM PRESS WSHR SPRAY TIP 25DEG 4MM
The spray should be directed at a 45 deg angle to the surface and be used like a scraper to remove paint, grease and dirt. Ideal for washing aluminum siding, cleaning windows, washing vehicles or spraying sidewalks, driveways and patios. Stainless steel blasting (red color-coded) pressure washer spray nozzle with 4 mm orifice and 1/4 in (6.35 mm) Quick-Connect (QC) plug. Blasting (red) QC spray nozzles have a powerful 0 deg pinpoint spray pattern for spot cleaning of hard, unpainted surfaces such as metal and concrete or for high reach areas. They are ideal for removing weeds from sidewalk cracks, stubborn mineral stains and chewing gum from concrete, masonry, aluminum and steel, caked mud from equipment and cleaning lawn mower undersides. Do not use blasting QC spray nozzles on wood. The orifice size of the nozzle determines the operating pressure of the end user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the gallons per minute (gpm) and pressure per square inch (psi) ratings of the pressure washer being used. As a general rule, QC spray nozzles with 4 mm orifices work excellent on pressure washers-rated between 500 psi with 1.4 gpm (low end) to 8000 psi with 5.7 gpm (high-end). For pressure washers in-between the low end and high-end, the recommended orifice size is roughly proportional from low end to high-end. The spray nozzle is designed to easily connect to a 1/4 in (6.35 mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry. Stainless steel flushing (green color-coded) pressure washer spray nozzle with 4 mm orifice and 1/4 in (6.35 mm) Quick-Connect (QC) plug. Flushing (green) QC spray nozzles have a 25 deg spray pattern for standard cleaning for most applications, including yard tools, sidewalks, lawn furniture, unpainted siding, stucco, gutters and eaves, concrete, and brick surfaces. Ideal for sweeping leaves from walks, curbs and driveways, cleaning stable floors, washing swimming pool bottoms, cleaning barbecue grills, etc. The orifice size of the nozzle determines the operating pressure of the end user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the gallons per minute (gpm) and pressure per square inch (psi) ratings of the pressure washer being used. As a general rule, QC spray nozzles with 4 mm orifices work excellent on pressure washers-rated between 500 psi with 1.4 gpm (low end) to 8000 psi with 5.7 gpm (high-end). For pressure washers in-between the low end and high-end, the recommended orifice size is roughly proportional from low end to high-end. The spray nozzle is designed to easily connect to a 1/4 in (6.35 mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry.
NOZZLE FLSH GREEN 25DEG 4.5MM NOZZLE WASHING WHT 40DEG 4.5MM NOZZLE BLASTING RED 0DEG 4.5MM
Forney Flushing Nozzle, 1/4 in Nozzle, 4.5 mm Orifice, 25 deg Angle, 4000 psi Pressure, Stainless Steel, Green Forney Washing Nozzle, 1/4 in Nozzle, 4.5 mm Orifice, 40 deg Angle, 4000 psi Pressure, Stainless Steel, White Forney Blasting Nozzle, 1/4 in Nozzle, 4.5 mm Orifice, 4000 psi Pressure, Stainless Steel, Red
NOZZLE SOAP BLACK 65DEG 4MM MI-T-M AW-0023-0491 Screw Nipple MI-T-M AW-0023-0492 Screw Nipple
Forney Soap Nozzle, 1/4 in Nozzle, 4 mm Orifice, 65 deg Angle, 4000 psi Pressure, Brass, Black Male pressure washer screw. Male nominal pipe thread x M22. Female pressure washer screw. Female nominal pipe thread x M22.
MI-T-M AW-0023-0493 Screw Nipple MI-T-M AW-0023-0494 Screw Nipple COUPLER QUICK 1/4IN PLG X M22F
Male pressure washer screw. Male nominal pipe thread x M22. Female pressure washer screw. Female nominal pipe thread x M22. Forney Quick Coupler, 1/4 x M22 in Connection, FNPT Connection, 5800 psi Pressure, 300 deg F
NOZZLE CHISLNG YEL 15DEG 4.5MM SCREW NIPPLE M22M X 1/4IN FNPT COUPLER QUICK 1/4IN FNPT SKT
Forney Chiseling Nozzle, 1/4 in Nozzle, 4.5 mm Orifice, 15 deg Angle, 4000 psi Pressure, Stainless Steel, Yellow Forney Long Screw Nipple, M22 x 1/4 in Connection, Male x FNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 1/4 in Male, Female Fittings Forney Quick Coupler, 1/4 in Connection, FNPT Connection, Brass, 5500 psi Pressure
MI-T-M AW-0017-0002 Quick Connect Adapter MI-T-M AW-0017-0017 Quick Connect Adapter NIPPLE SCREW M22M X 1/4IN MNPT
1/4 in MNPT x 1/4 in quick connect plug. 1/4 in FNPT x 1/4 in quick connect plug. Forney Screw Nipple, M22 x 1/4 in Connection, Male x MNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 1/4 in Male, Female Fittings
NIPPLE SCREW M22M X 3/8IN MNPT NIPPLE SCREW M22M X 1/4IN FNPT NIPPLE SCREW M22M X 3/8IN FNPT
Forney Screw Nipple, M22 x 3/8 in Connection, Male x MNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 3/8 in Male, Female Fittings Forney Screw Nipple, M22 x 1/4 in Connection, Male x FNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 1/4 in Male, Female Fittings Forney Screw Nipple, M22 x 3/8 in Connection, Male x FNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 3/8 in Male, Female Fittings
   
 
1 2 3 ... 5